CAS DL-60 Specifications download pdf (Page 7)

USING ADAPTOR

Convert switch to AC 110V or 220V.

Use only adaptor DC 9V/300mA.

Connect the adaptor into AC outlet and

insert plug into the jack on the scale.

Press the ON/OFF key.

1. Power Source

USING BATTERIES

Prepare six pieces of DC 1.5V(CM) batteries.

Open the cover in the back of the scale and insert the batteries as shown in

Fig.1.

Close the cover and press the ON/OFF key then the scale is on.

If you have low battery, the display shows “Err-5” as Fig.2 and the scale is off

automatically.

OPERATIONS

Fig.1 Fig.2

Fig.3

ZERO

2. General Weighing

When the display is not zero though there is nothing on the platter, press the

ZERO key.

Place a commodity on the

platter.

Remove the commodity

from the platter.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

CAS DL-60 Specifications Page 7