CAS DL-60 Specifications Page 1

CONTENTSPRECAUTIONS 4PREFACE 6 NAMES AND FUNCTIONS 6INSTALLATIONS 8OPERATIONS 91. Power Source 92. General Weighing 93. Weighing with Tare 104. HOLD

12KEY FUNCTIONSSETHOLDINCMODEWhen the weight is not stable, the display will show average weight.Used to increase the number to enter the limit value.

13Limit ModeYou have to set the high value and low value to use this limit function.How to set the limitChange the mode to limit mode(kg) and press th

14SPECIFICATIONSMODELMAX. CAPACITYMIN. CAPACITYMAX. TAREDISPLAY POWER SOURCEPOWER CONSUMPTIONTEMPERATURE RANGEPRODUCT SIZE (WD H)mmNotice: Specifica

15The method of connecting antistatic grounding wire.Fig.4Grounded from its support as Fig.4.

4Do not subject the scale to suddentemperature changes.PRECAUTIONS Place the scale on a flat and stable surface.Do not subject the platter to sudde

5Keep the scale away from strong EMI noises may cause incorrect weightreadings.If the scale is not properly level, please adjust the 4 legs at the bot

6PREFACENAMES AND FUNCTIONSThank you for purchasing our CAS DL series.These series have been designed with CAS reliability, under rigid quality contro

7DISPLAY AND KEYBOARDCALZEROTAREHIGOLOLBkgPCSONOFFZERO TARE HOLDONOFFZERO TARE SET MODEHOLDINCKEY FUNCTIONSONOFFZEROTAREHOLDTurn on or off the display

8INSTALLATIONS1. Insert and fasten the bracket support assembly screws.2. Connect the load cell wire and power line to head.3. Insert the support cove

9USING ADAPTORConvert switch to AC 110V or 220V.Use only adaptor DC 9V/300mA.Connect the adaptor into AC outlet andinsert plug into the jack on the sc

10kgZEROTAREkgTAREkgONOFFZERO TARE HOLDZEROTAREkgZEROkgONOFFZERO TARE HOLD3. Weighing with TARETare is the weight of container being used for a commod

11ONOFFZERO TARE SET MODEHOLDINCAuto power off function setInitial displayAuto power off function reset5. Auto Power OffAuto-Power off function length