CAS TP Series Owner's Manual download pdf (Page 11)

12. Tare Option

After setting the back-light function, press the ZERO key.

TARE

Press the TARE key until the display shows On or Off.

On means that you can program tare while saving a

PLU and Off means that you can not program tare while

saving a PLU. (Refer to 5. How to Save a PLU)

ZERO

Press the ZERO key to save this setting then you will go to

normal mode.

13. How to Charge the Battery

If you have the low battery, the scale shows . At this time, charge the battery

by using the adapter. Note that only rechargeable battery is available.

When the red lamp is on, it means that the battery is charging. It takes for 4 hours

to charge the battery.

When the green lamp is on, it means that charging is finished. (If you want to

fully charge the battery, charge it one more hour.)

Low battery

When the battery is low, the scale shows . And then economize power.

Therefore you can't use back light function after 1 hour. Note that you can

use back-light function by pressing the EL key, but it shorten operating time.

If you do not use the back-light, you can use the scale for 67 hours.

Note : You can set the back-light function.

(Refer to 11. How to Set the Back-light function.)

EL ALL ON EL OFF

Normal Battery About 100 hours About 200 hours

Alkaline Battery About 250 hours About 500 hours

Rechargeable Battery About 80 hours About 251 hours

Back light Option

Item

The expected life span of batteries

(TP-

STANDARD MODE)

OFL

This is an overload.

Before turn on the power, make sure that there is nothing on the platter.

Remove the commodity from the platter.

ERROR MESSAGE

1 2 ... 6 7 8 9 10 11 12

No comments

CAS TP Series Owner's Manual Page 11